เวลาให้บริการ: วันจันทร์ถึงวันศุกร์ 9:00-18:00 น.
VAL-SEC-T2-3C-440-FM - VAL-SEC-T2-3C-440-FM 2909968 PHOENIX CONTACT Type 2 surge arrester
มีสินค้าพร้อมส่ง สินค้าขายดี

VAL-SEC-T2-3C-440-FM

VAL-SEC-T2-3C-440-FM 2909968 PHOENIX CONTACT Type 2 surge arrester

$0.00 ดอลลาร์สหรัฐ
มีสินค้าในสต็อก
ข้อมูลจำเพาะหลัก
: T2
บันทึก: Usable in all low-voltage systems between L-N or L-PEN.Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation. (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. RE= RAaccordance to IEC 60364-4-442 / VDE 0100-442 Fig. 44D / Example a)
พิมพ์: DIN rail module, two-section, divisible
ความลึก: 74.5 mm (incl. DIN rail 7.5 mm)
ข้อมูลผู้จำหน่าย
ผลิตภัณฑ์: 0
โดยปกติจะจัดส่งภายใน 2-3 วันทำการ
รับประกันคุณภาพ
จัดส่งรวดเร็ว
ฝ่ายสนับสนุนด้านเทคนิค

ข้อกำหนดทางเทคนิค

พารามิเตอร์ ค่า
T2
บันทึก Usable in all low-voltage systems between L-N or L-PEN.Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation. (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. RE= RAaccordance to IEC 60364-4-442 / VDE 0100-442 Fig. 44D / Example a)
พิมพ์ DIN rail module, two-section, divisible
ความลึก 74.5 mm (incl. DIN rail 7.5 mm)
ความกว้าง 37.3 mm
ความสูง 97.9 mm
ประเภท EN T2
ระดับความสูง ≤ 2000 m (amsl)
ประเภทผลิตภัณฑ์ Surge arrester
เกลียวสกรู M5
ประเภทการติดตั้ง DIN rail: 35 mm
กลุ่มวัสดุ I
กลุ่มผลิตภัณฑ์ SEC Family
ชื่อการเชื่อมต่อ Remote fault indicator contact
การแก้ไขบทความ 03
ระยะห่างแนวนอน 2 Div.
วัสดุสำหรับที่อยู่อาศัย PA 6.6-FR 20 % GF
ระดับมลพิษ 2
เวลาตอบสนอง tA ≤ 25 ns
ความยาวในการลอก 16 mm
วิธีการเชื่อมต่อ Screw connection
กระแสไฟฟ้าขณะใช้งาน 5 mA AC ... 1 A AC
แรงดันไฟฟ้าใช้งาน 5 V AC ... 250 V AC
ช็อก (การผ่าตัด) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
แรงบิดในการขัน 4.5 Nm
โหมดการป้องกัน L-PEN
แรงดันไฟฟ้าที่ระบุ UN 400/690 V AC (TN-C)
ฟังก์ชันการสลับ Changeover contact
พฤติกรรม TOV ที่ UT 581 V AC (5 s / withstand mode)
ภาพวาดแสดงขนาด
ทิศทางการดำเนินการ 3L-N/PE
วัสดุฉนวน PA6.6-FR 20% GF
จำนวนตำแหน่ง 3
สี (องค์ประกอบหลัก) gray (RAL 7042)
ระดับการป้องกัน IP20
ความถี่ระบุ fN 50 Hz (60 Hz)
หมวดหมู่แรงดันไฟเกิน III
มูลค่าวัสดุตาม CTI 600
กระแสโหลดพิกัด IL 40 A (Biconnect M4 fork-type cable lug 6​ mm²)
แรงดันตกค้างยูเรส ≤ 1.9 kV (at In)
การสั่นสะเทือน (การทำงาน) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
สี (ขั้วต่อตัวผู้) light gray (RAL 7035)
ระบบจ่ายไฟ IEC TN-C
การจำแนกประเภทการทดสอบ IEC II
มาตรฐาน/ข้อกำหนด IEC 61643-11
หน้าตัดตัวนำ AWG 12 ... 4
ระดับการป้องกันแรงดันไฟฟ้าขึ้น ≤ 1.9 kV
การใช้พลังงานในโหมดสแตนด์บายของพีซี ≤ 540 mVA
หน้าตัดตัวนำแข็ง 2.5 mm² ... 25 mm²
แรงดันไฟฟ้าต่อเนื่องสูงสุด UC 440 V AC
ข้อความแสดงข้อผิดพลาดเกี่ยวกับการป้องกันไฟกระชาก Optical, remote indicator contact
อุณหภูมิแวดล้อม (ขณะใช้งาน) -40 °C ... 80 °C
หน้าตัดตัวนำมีความยืดหยุ่น 2.5 mm² ... 16 mm²
ความชื้นที่อนุญาต (ในการใช้งาน) 5 % ... 95 %
พิกัดกระแสลัดวงจร ISCCR 25 kA (for a backup fuse of up to 315 A gG)
ฟิวส์สำรองสูงสุดพร้อมการเดินสายแยก 315 A (gG)
ระดับความไวไฟตามมาตรฐาน UL 94 V-0
กระแสคายประจุที่ระบุ In(8/20) µs 20 kA
อุณหภูมิแวดล้อม (การจัดเก็บ/การขนส่ง) -40 °C ... 80 °C
กระแสคายประจุสูงสุด Imax(8/20) µs 40 kA
ฟิวส์สำรองสูงสุดแบบ V-type ต่อผ่านสายไฟ 40 A (gG / Biconnect M4 fork-type cable lug, 6​ mm²)

คำอธิบายผลิตภัณฑ์

Plug-in surge arrester according to type 2/class II, for three-phase power supply networks with PE and N routing combined in one conductor (4-conductor system: L1, L2, L3, PEN), with remote indication
คุณสมบัติหลัก
  • คุณภาพระดับอุตสาหกรรม
  • เป็นไปตามมาตรฐาน RoHS
  • ได้รับการรับรอง CE
  • รับประกัน 1 ปี

เอกสารผลิตภัณฑ์

เอกสารข้อมูลทางเทคนิค

ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ

คู่มือผู้ใช้

คู่มือการติดตั้งและการใช้งาน

Top