| พารามิเตอร์ | ค่า |
|---|---|
| รายการ | Specifications |
| พิมพ์ | High functionality type |
| สายเคเบิล | 14-core cabtyre cable with connector, 0.5 m1.640 ftlong |
| หมายเหตุ | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values. |
| น้ำหนัก | Net weight: 70 g approx. (not including cable), 110 g approx. (including cable)Gross weight: 160 g approx. |
| รายละเอียด | Sensor head (High functionality type) |
| ผลิตภัณฑ์ | Compact Laser Displacement Sensor |
| วัสดุ | Enclosure: PBTFront cover: AcrylicCable: PVC |
| อุปกรณ์เสริม | Warning label: 1 set |
| ความเป็นเส้นตรง | ± 0.1 % F.S. |
| ปณิธาน | 1.5 μm0.059 mil |
| อินพุตหลายช่อง | Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.In case NPN output is selected, Function varies according to the time 0 V is connected NPN.In case PNP output is selected, Function varies according to the time external power + is connected. |
| หมายเลขชิ้นส่วน | HL-G105-S-J |
| แหล่งกำเนิดแสง | Red semiconductor laser, Class 2 (IEC / EN / JIS / GB / KS / FDA (Note:This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.Max. output: 1 mW (Peak emission wavelength: 655 nm0.026 mil) |
| ชื่อผลิตภัณฑ์ | Compact Laser Displacement Sensor HL-G1 |
| อินพุตเวลา | NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)PNP output operates when external power + is connected and PNP is set. (It depends on the setting.) |
| เส้นผ่านศูนย์กลางลำแสง | 0.5 × 0.1 mm0.020 x 0.039 in(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2(13.5 %) of the center light intensity. Ifthere is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than thesensing point itself, then the results may be affected. |
| อัตราการสุ่มตัวอย่าง | 200 μs, 500 μs, 1 ms, 2 ms |
| หมายเลขผลิตภัณฑ์ | HL-G105-S-J |
| แรงดันไฟฟ้าที่จ่าย | 24 V DC ± 10 % including ripple 0.5 V (P-P) |
| สายต่อขยาย | Extension up to total 20 m65.617 ftis possible with optional cable. |
| จอแสดงผลดิจิทัล | Red LED 5 digit display |
| ช่วงการวัด | ± 10 mm± 0.394 in |
| ตัวบ่งชี้: สัญญาณเตือน | Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity. |
| องค์ประกอบรับสัญญาณ | CMOS image sensor |
| ระดับความสูงในการปฏิบัติงาน | 2,000 m6561 ftor less |
| การใช้พลังงานในปัจจุบัน | 100 mA or less |
| ระดับมลพิษ | 2 |
| ความต้านทานฉนวน | 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure |
| การปฏิบัติตามกฎระเบียบ | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| เอาต์พุตแบบอนาล็อก : กระแสไฟฟ้า | Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)Load impedance: 300 Ω or less |
| เอาต์พุตแบบอนาล็อก: แรงดันไฟฟ้า | Output range: 0 to +10.5 V (normal), 11 V (alarm)Output impedance: 100 Ohm |
| อินเทอร์เฟซการสื่อสาร | RS-422 or RS-485 (selectable)Baud rate: 9,600/19,200/38,400/115,200/230,400/460,800/921,600 bpsData length 8 bit, Stop bit length 1 bit, Without parity check, BCC check, Termination code: CR |
| ความทนทานต่อแรงดันไฟฟ้า | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| ตัวบ่งชี้: การปล่อยแสงเลเซอร์ | Green LED (lights up during laser emission) |
| ระยะห่างศูนย์กลางการวัด | 50 mm1.969 in |
| ลักษณะอุณหภูมิ | ± 0.08 % F.S. / ℃ |
| ตัวบ่งชี้: ช่วงการวัด | Three yellow LED |
| การตั้งค่าขั้วเอาต์พุตอินพุต | NPN open collector output operates when 0 V is connected.PNP open collector output operates when 24 V DC is connected. |
| เอาต์พุต (OUT 1, OUT 2, OUT 3) | Judgment output or alarm output (Setting can be selected.)Selectable NPN transistor open-collector or PNP transistor open-collector-Maximum sink current: 50 mA-Applied voltage: 3 to 24 V DC (between output and 0 V)-Residual voltage: 2 V or less (at 50 mA of sink current)-Maximum source current: 50 mA-Residual voltage: 2.8 V or less (at 50 mA of source current) |
| ความทนทานต่อสภาพแวดล้อม : การป้องกัน | IP67 |
| ความทนทานต่อสภาพแวดล้อม: ความชื้นในอากาศ | 35 to 85 % RH, Storage: 35 to 85 % RH |
| ความทนทานต่อสภาพแวดล้อม: ความทนทานต่อแรงกระแทก | 500 m/s2acceleration (50 G approx.) in X,Y and Z directions three times each |
| ความต้านทานต่อสภาพแวดล้อม: ความสว่างของสภาพแวดล้อม | Incandescent light: 3,000 liter x or less at the light-receiving face(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less. |
| ความทนทานต่อสภาพแวดล้อม: อุณหภูมิแวดล้อม | -10 to +45 ℃+14 to +113 ℉(No dew condensation allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| ความทนทานต่อสภาพแวดล้อม: ความทนทานต่อการสั่นสะเทือน | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X,Y and Z directions for two hours each |
| เอาต์พุต (OUT 1, OUT 2, OUT 3) : การดำเนินการเอาต์พุต | Opened when the amount of light is insufficient. |
| เอาต์พุต (OUT 1, OUT 2, OUT 3) : ระบบป้องกันการลัดวงจร | Incorporated (automatic restoration) |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน