| พารามิเตอร์ | ค่า |
|---|---|
| When communication unitis connected | |
| รายการ | Specifications |
| สายเคเบิล | 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| รายละเอียด | Slave unit / Wire-saving type |
| ผลิตภัณฑ์ | Controller |
| วัสดุ | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| น้ำหนักสุทธิ | 60 g approx. |
| หมายเลขชิ้นส่วน | HG-TC113 |
| 1 ถึง 7 หน่วย | 1 to 6 units |
| ชื่อผลิตภัณฑ์ | Thru-beam Type Digital Displacement Sensor HG-T |
| 8 ถึง 15 หน่วย | 7 to 14 units |
| ช่วงการแสดงผล | -199.999 to 199.999 mm-7.874 to 7.874 in |
| อัตราการสุ่มตัวอย่าง | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| หมายเลขผลิตภัณฑ์ | HG-TC113 |
| แรงดันไฟฟ้าที่จ่าย | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| ระดับมลพิษ | 2 |
| ความละเอียดหน้าจอ | 1 μm0.039 mil |
| ระดับความสูงในการปฏิบัติงาน | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| การใช้พลังงานในปัจจุบัน | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| การปฏิบัติตามกฎระเบียบ | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| หัวเซ็นเซอร์ที่ใช้งานได้ | HG-T1010、HG-T1110 |
| จำนวนเฉลี่ย (เวลาตอบสนอง) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| จำนวนหน่วยลูกสเลฟที่เชื่อมต่อ | Maximum sink current and sourcecurrent of control output |
| ความทนทานต่อสภาพแวดล้อม : การป้องกัน | IP40(IEC) |
| จำนวนคอนโทรลเลอร์ที่เชื่อมต่อได้สูงสุด | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| ความทนทานต่อสภาพแวดล้อม: ความชื้นในอากาศ | 35 to 85 % RH, Storage: 35 to 85 % RH |
| ความทนทานต่อสภาพแวดล้อม: ความทนทานต่อแรงกระแทก | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| ความทนทานต่อสภาพแวดล้อม: อุณหภูมิแวดล้อม | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10~+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| ความทนทานต่อสภาพแวดล้อม: ความทนทานต่อการสั่นสะเทือน | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| ความต้านทานต่อสภาพแวดล้อม: ความต้านทานต่อฉนวน | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| ความทนทานต่อสภาพแวดล้อม: ความสามารถในการทนต่อแรงดันไฟฟ้า | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน