| พารามิเตอร์ | ค่า |
|---|---|
| รายการ | Specifications |
| สายเคเบิล | 0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong |
| เอาต์พุต | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between output and +V)- Residual voltage: 2 V or less (at 100 mA source current) |
| รายละเอียด | PNP output |
| ผลิตภัณฑ์ | Rectangular-shaped Inductive Proximity Sensor |
| วัสดุ | Enclosure: PBTIndicator part: Polyester |
| ฮิสเทอรีซิส | 20 % or less of operation distance(with standard sensing object) |
| น้ำหนักสุทธิ | 15 g approx. |
| การป้องกัน | IP68 (IEC), IP68g (JEM)(Note) Panasonic Electric Works SUNX's IP68 test method1. Immerse at 0 m below 0 ℃+32 ℉water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃+158 ℉water surface and leave for 30 min.2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.3. Leave in water at a depth of 1 m3.281 ftin water for 500 hours.4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| หมายเลขชิ้นส่วน | GX-F8B-P |
| ชื่อผลิตภัณฑ์ | Rectangular-shaped Inductive Proximity Sensor GX-F/H |
| ความสามารถในการทำซ้ำ | Along sensing axis, perpendicular to sensing axis: 0.04 mm0.002 inor less |
| หมายเลขผลิตภัณฑ์ | GX-F8B-P |
| แรงดันไฟฟ้าที่จ่าย | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| สายต่อขยาย | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| ความชื้นในอากาศ | 45 to 85 % RH, Storage: 35 to 95 % RH |
| ความต้านทานต่อแรงกระแทก | 10,000 m/s2acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| อุณหภูมิแวดล้อม | -25 to +70 ℃-13 to +158 ℉, Storage: - 40 to +85 ℃- 40 to +185 ※ |
| การใช้พลังงานในปัจจุบัน | 15 mA or less |
| ตัวบ่งชี้การทำงาน | Orange LED(lights up when the output is ON) |
| ระยะการตรวจจับที่เสถียร | 0 to 2.1 mm0 to 0.083 in(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. |
| ความต้านทานต่อการสั่นสะเทือน | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| ความต้านทานฉนวน | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| ระยะการทำงานสูงสุด | 2.5 mm0.098 inplus or minus 8 %(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. |
| ความถี่ตอบสนองสูงสุด | 500 Hz |
| เอาต์พุต: การดำเนินการเอาต์พุต | Normally closed |
| วัตถุตรวจจับมาตรฐาน | Iron sheet 15 × 15 × t 1 mm0.591 × 0.591 × t 0.039 in |
| ความทนทานต่อแรงดันไฟฟ้า | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| ผลลัพธ์: หมวดหมู่การใช้งาน | DC-12 or DC-13 |
| ข้อบังคับและใบรับรองที่เกี่ยวข้อง | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| การเปลี่ยนแปลงช่วงการตรวจจับ: ลักษณะแรงดันไฟฟ้า | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| ความแปรผันของช่วงการตรวจวัด: ลักษณะอุณหภูมิ | Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉ |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน