| พารามิเตอร์ | ค่า |
|---|---|
| รายการ | Specifications |
| สายเคเบิล | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| เอาต์พุต | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| น้ำหนัก | Net weight: 20 g approxGross weight: 45 g approx |
| รายละเอียด | Retroreflective[Side sensing] |
| ผลิตภัณฑ์ | Ultra-compact Photoelectric Sensor |
| วัสดุ | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| อุปกรณ์เสริม | RF-200 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| ฮิสเทอรีซิส | - |
| การป้องกัน | IP67 (IEC) |
| หมายเลขชิ้นส่วน | EX-29A |
| ชื่อผลิตภัณฑ์ | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| เวลาตอบสนอง | 0.5 ms or less |
| ระยะการตรวจจับ | 30 to 200 mm 1.181 to 7.874 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque. |
| หมายเลขผลิตภัณฑ์ | EX-29A |
| การตรวจจับวัตถุ | dia. 15 mm dia. 0.591 in or more opaque or translucent object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.(Note) Make sure to confirm detection with an actual sensor before use. |
| แรงดันไฟฟ้าที่จ่าย | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| สายต่อขยาย | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| ความชื้นในอากาศ | 35 to 85 % RH, Storage: 35 to 85 % RH |
| องค์ประกอบการปล่อย | Red LED (modulated) |
| ความต้านทานต่อแรงกระแทก | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| ความสว่างโดยรอบ | Incandescent light: 3,000 lx or less at the light-receiving face |
| อุณหภูมิแวดล้อม | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| การใช้พลังงานในปัจจุบัน | 13 mA or less |
| ตัวบ่งชี้การทำงาน | Orange LED (lights up when the output is ON) |
| ตัวบ่งชี้ความเสถียร | Green LED (lights up under stable light received condition or stable dark condition) |
| ตัวปรับความไว | Continuously variable adjuster |
| ความต้านทานต่อการสั่นสะเทือน | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| ความต้านทานฉนวน | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| สวิตช์โหมดการทำงาน | - |
| ความทนทานต่อแรงดันไฟฟ้า | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| ผลลัพธ์: หมวดหมู่การใช้งาน | DC-12 or DC-13 |
| การปฏิบัติตามข้อกำหนดเครื่องหมาย CE | EMC Directive, RoHS Directive |
| เอาต์พุต: ระบบป้องกันการลัดวงจร | Incorporated |
| องค์ประกอบที่เปล่งแสง: ความยาวคลื่นการเปล่งแสงสูงสุด | 680 nm 0.027 mil |
| ความแม่นยำในการวัดซ้ำ (ตั้งฉากกับแกนการตรวจจับ) | 0.5 mm 0.020 in or less |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน