| พารามิเตอร์ | ค่า |
|---|---|
| รายการ | Specifications |
| สายเคเบิล | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| หมายเหตุ | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.Oil is used in the factory inspection process for models DPH-L114 and DPH-L154. There may be some residual oil inside the pressure port. |
| น้ำหนัก | Net weight : 100 g approx., Gross weight : 150 g approx. |
| รายละเอียด | Sensor head |
| ผลิตภัณฑ์ | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| วัสดุ | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| การป้องกัน | IP67 (IEC) |
| เครื่องประดับ | Connector (e-CON) : 1 pc. |
| หมายเลขชิ้นส่วน | DPH-L114 |
| ชื่อผลิตภัณฑ์ | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| ช่องรับแรงดัน | R1/4 male thread (throttle embeded) |
| เวลาตอบสนอง | 1 ms or less |
| หมายเลขผลิตภัณฑ์ | DPH-L114 |
| แรงดันไฟฟ้าที่จ่าย | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| สายต่อขยาย | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| ความชื้นในอากาศ | 35 to 85 % RH, Storage : 35 to 85 % RH |
| ของเหลวที่ใช้ได้ | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| วิธีการต่อสายดิน | Capacitor earth (Enclosure-supply terminal) |
| ความต้านทานต่อแรงกระแทก | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| ประเภทของแรงดัน | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| วิธีการเชื่อมต่อ | Connector |
| อุณหภูมิแวดล้อม | -20 to +80 ℃ (Pressure port: -20 to +125 ℃\n-4 to +257 ℉, No dew condensation or icing allowed),\n Storage: -30 to +100 ℃-22 to +212 ℉\n[e-CON connector (accesory):-20 to +75 ℃\n-4 to +167 ℉\n(Storage: -30 to +75 ℃-22 to +167 ℉)] |
| การใช้พลังงานในปัจจุบัน | 20 mA or less |
| ช่วงแรงดันที่กำหนด | 0 to +10 MPa |
| ความต้านทานต่อการสั่นสะเทือน | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| เอาต์พุตแรงดันไฟฟ้าแบบอนาล็อก | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 125 ℃-4 to +257 ℉)\n (including linearity, hysteresis and repeatability) |
| ความต้านทานฉนวน | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| ข้อบังคับที่เกี่ยวข้อง | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| ช่วงอุณหภูมิปานกลาง | -20 to +125 ℃-4 to +257 ℉ |
| ความทนทานต่อแรงดันไฟฟ้า | 150 V AC for one min. between all supply terminals connected together and enclosure |
| ความทนทานต่อแรงดัน | 20 MPa |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน