| พารามิเตอร์ | ค่า |
|---|---|
| ชื่อ | RSD-300F-5 |
| สถานะ | Recommended Model |
| รูปแบบ | Box |
| ชุด | RSD-300 |
| การอนุมัติ | EC |
| กำลังไฟ (วัตต์) | 210,00 |
| รูปแบบย่อย | IP20 |
| ความกว้าง (มม.) | 97.00 |
| ความสูง (มม.) | 40.00 |
| ช่วงอินพุต | 2:1 |
| แอปพลิเคชัน | Railway, Industrial, Telecommunications |
| อินพุต DC สูงสุด | 93,60 |
| อินพุต DC ขั้นต่ำ | 50,40 |
| ผู้ผลิต | MEAN WELL |
| ประเภทผลิตภัณฑ์ | Dc/DC converters |
| การแยก (V) | 4.000,00 |
| แรงดันเอาต์พุต | 5,00 |
| กำลังสูงสุด (วัตต์) | Two hundred ten |
| ช่วงอินพุต DC | 50,4, 52, 56, 60, 62,4, 64,4, 67,2, 72, 75, 77, 88, 93,6 |
| ขั้วต่ออินพุต | Screw-Type |
| ระยะยาว/พื้นหลัง | 216.00 |
| คำอธิบายโดยละเอียด | Dc/DC converter rail is a regulated isolated output.Converter for railway applications,industrial or telecommunications.Input range50,4-93,6 Vcc(43,2-100,8 Vdc for 1 second). Range rail to 72V input.Output voltage5vdc.Output intensity42A.Power:210W.Isolation input-output 4000Vcc.Efficiency of the89%.Operating temperature from-40up+70 ° C(see the curve derived in the technical data sheet). 85 ° c for 10 minutes with ventilation by conduction.Dimensions (Width x Height x depth):216 x 97 x 40mm.3 years degarantía.Manufacturer: MEAN WELL.It is a converter designed for railway applications, industrial or telecommunications.Is certified with the regulations for railway EN50155 and EN45545-2 in front of the fire.Can operate up to 55C at full load and 70 ° C at 60% load or 70 ° C ambient temperature with ventilation by driving without losses. Also supports a temperature range of more demanding level rail Tx to 85ºC ambient temperature for 10 minutes with ventilation by driving on a metal surface.This converter semi-encapsulation has been designed for the most demanding applications at the level of vibration, temperature, and humidity. Has a low profile of only 40mm and uses only components prepared for high temperatures as for example capacitors of 105ºC.It has a low noise and ripple, and high efficiency and is protected against reverse polarity at the input. The inrush current is limited by a resistor in series with a MOSFET to reduce the peak starting current to reliably regardless of the ambient temperature.Its output is protected against short-circuits and overloads by limiting output current, this allows you to start loads with a high inrush. |
| ขั้วต่อเอาต์พุต | Screw-Type |
| การรับประกัน (ปี) | 3,00 |
| ประเทศต้นกำเนิด | Taiwan |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน