| พารามิเตอร์ | ค่า |
|---|---|
| ชื่อ | HLG-60H-30B |
| สถานะ | Recommended Model |
| รูปแบบ | Box |
| ชุด | HLG-60H-B |
| การหรี่แสง | 1-10V, Resistance 0-100K, PWM Signal 10V |
| การอนุมัติ | CCC, CE, EAC, KCC, MM, PSE, RCM, TUV, UL |
| กำลังไฟ (วัตต์) | 60,00 |
| รูปแบบย่อย | IP67 |
| ความกว้าง (มม.) | 61.50 |
| ความสูง (มม.) | 36.80 |
| อินพุต AC สูงสุด | 305,00 |
| อินพุต AC ขั้นต่ำ | 90,00 |
| แอปพลิเคชัน | Lighting |
| ผู้ผลิต | MEAN WELL |
| ประเภทผลิตภัณฑ์ | LED Driver |
| การแยก (V) | 3.750,00 |
| กำลังสูงสุด (วัตต์) | Sixty |
| ขั้วต่ออินพุต | Cable |
| ความถี่อินพุต | 50 Hz, 60 Hz |
| ระยะยาว/พื้นหลัง | 171.00 |
| คำอธิบายโดยละเอียด | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range90-305Vca47-63Hz.Output in constant currentTwoA.Range of output voltage with current mode constantEighteento 30vdcaccording to demand load.Power:60W.Efficiency typical:90%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0.95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):171 x 61.5 x 36,8 mm7 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.The series HLG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 30V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing, waterproof to IP67. The series HLG has a high efficiency designed for applications of public lighting, architectural, exterior, interior or any lighting application LED needs a driver of high quality. Approved HL Class I Division 2 for ex-zones in the US. Suitable for LED lighting or LED displays. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| ขั้วต่อเอาต์พุต | Cable |
| ประเภทของรายการ CA | Single-phase |
| การรับประกัน (ปี) | 7,00 |
| ประเทศต้นกำเนิด | China |
| กระแสเอาต์พุต mA | Two thousand |
| ความเข้มของเอาต์พุตขั้นต่ำ (มิลลิแอมป์) | 2.000,00 |
| ความเข้มของเอาต์พุตสูงสุด (มิลลิแอมป์) | 2.000,00 |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน