เวลาให้บริการ: วันจันทร์ถึงวันศุกร์ 9:00-18:00 น.
HC-M-02-HS-70/22-MOD-ST - HC-M-02-HS-70/22-MOD-ST 1585728 PHOENIX CONTACT Contact insert module
มีสินค้าพร้อมส่ง สินค้าขายดี

HC-M-02-HS-70/22-MOD-ST

HC-M-02-HS-70/22-MOD-ST 1585728 PHOENIX CONTACT Contact insert module

$0.00 ดอลลาร์สหรัฐ
มีสินค้าในสต็อก
ข้อมูลจำเพาะหลัก
จีทีเอ็น: 4046356308229
บันทึก: Made to Order (non-returnable)
รหัสลำดับ: 1585728
หน้าแคตตาล็อก: Page 553 (C-4-2015)
ข้อมูลผู้จำหน่าย
ผลิตภัณฑ์: 0
โดยปกติจะจัดส่งภายใน 2-3 วันทำการ
รับประกันคุณภาพ
จัดส่งรวดเร็ว
ฝ่ายสนับสนุนด้านเทคนิค

ข้อกำหนดทางเทคนิค

พารามิเตอร์ ค่า
จีทีเอ็น 4046356308229
บันทึก Made to Order (non-returnable)
รหัสลำดับ 1585728
หน้าแคตตาล็อก Page 553 (C-4-2015)
หน่วยบรรจุภัณฑ์ 2 pc
ประเทศต้นกำเนิด DE (Germany)
หมายเลขภาษีศุลกากร 85366990
(สภาพแวดล้อมโดยรอบ) 5 Nm (22 mm²)
ปริมาณการสั่งซื้อขั้นต่ำ 2 pc
ข้อมูลการติดต่อ (ทั่วไป) Copper alloy
กระแสไฟฟ้าที่กำหนด (ขนาด) 70 A
ความกว้าง (ข้อมูลเชิงพาณิชย์ที่สำคัญ) 34.2 mm
(มาตรฐานและข้อบังคับ) For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
ความสูง (ข้อมูลสำคัญทางการค้า) 45 mm
ความยาว (ข้อมูลสำคัญทางการค้า) 14.6 mm
รายละเอียดการเชื่อมต่อ (มิติ) 2
แรงดันไฟกระชากที่กำหนด (ขนาด) 8 kV
วัสดุตัวนำสัมผัส (ทั่วไป) PC
วัสดุพื้นผิวสัมผัส (ทั่วไป) Ag
แรงดันไฟฟ้าที่กำหนด (III/3) (ขนาด) 1000 V
ซีรี่ส์ (คุณลักษณะทางกล) HC-M-02
น้ำหนักต่อชิ้น (ไม่รวมบรรจุภัณฑ์) 32.750 g
ซ็อกเก็ตหกเหลี่ยม (สภาวะแวดล้อมปกติ) SW2,5
มาตรฐานและข้อบังคับ RoHS ของจีน Environmentally Friendly Use Period = 50
แรงบิดในการขัน (สภาวะแวดล้อม) 4 Nm (for 14 mm² ... 16 mm²)
การเชื่อมต่อ (คุณลักษณะทางกล) Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque.
ความสูงขั้นต่ำของที่อยู่อาศัย (สภาพแวดล้อมโดยรอบ) 72 mm
หน้าตัดของตัวนำ (สภาวะแวดล้อม) 14 mm² ... 22 mm²
วิธีการเชื่อมต่อ (คุณลักษณะทางกล) Axial screw connection
การเชื่อมต่อตามมาตรฐาน (ข้อมูลวัสดุ) UL
ระดับมลพิษ (ลักษณะทางกล) 3
รอบการใส่/ถอด (สภาวะแวดล้อมปกติ) ≥ 500
หน้าตัดการเชื่อมต่อ AWG (สภาวะแวดล้อม) 6 ... 4
ประเภทแรงดันเกิน (คุณลักษณะทางกล) III
คำแนะนำในการประกอบ (คุณลักษณะทางกล) Use 2.5 mm Allen wrenches for axial connection. Only for stranded wires. For housing heights h ≥ 52 mm. Plug-in connections may only be operated only when there is no load/voltage.
จำนวนช่องเสียบโมดูล (คุณลักษณะทางกล) 1
ระดับความไวไฟตามมาตรฐาน UL 94 (ข้อมูลวัสดุ) V0
เส้นผ่านศูนย์กลางของสายไฟรวมฉนวน (สภาวะแวดล้อม) 10 mm
อุณหภูมิแวดล้อม (ขณะทำงาน) (คุณลักษณะทางไฟฟ้า) -40 °C ... 125 °C
ความยาวในการลอกฉนวนของสายไฟแต่ละเส้น (สภาวะแวดล้อม) 11 mm +1 (14 mm² ... 16 mm²)
ระดับความไวไฟตามมาตรฐาน UL 94 (คุณลักษณะทางกล) V0

คำอธิบายผลิตภัณฑ์

More details
คุณสมบัติหลัก
  • คุณภาพระดับอุตสาหกรรม
  • เป็นไปตามมาตรฐาน RoHS
  • ได้รับการรับรอง CE
  • รับประกัน 1 ปี

เอกสารผลิตภัณฑ์

เอกสารข้อมูลทางเทคนิค

ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ

คู่มือผู้ใช้

คู่มือการติดตั้งและการใช้งาน

Top