| พารามิเตอร์ | ค่า |
|---|---|
| Fiber amplifierconnector | |
| รายการ | Functions |
| รูปร่าง | Type |
| ฟังก์ชัน | Power tuning |
| เดินสายไฟไว้ล่วงหน้า | AND/OR output |
| เอาต์พุต NPN | PNP output |
| การตั้งค่าอินพุต/เอาต์พุต | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| เวลาตอบสนอง | Super-high-speed mode |
| โหมดมาตรฐาน | 1 ms for operation and reset respectively |
| ฟังก์ชันจับเวลา | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| จอแสดงผลดิจิทัล | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| วงจรป้องกัน | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| การตั้งค่าความไว | Teaching and digital up/down keys |
| ระดับการป้องกัน | IEC 60529 IP50 (with protective cover attached) |
| โหมดความละเอียดสูง | 4 ms for operation and reset respectively |
| แรงดันไฟฟ้าของแหล่งจ่ายไฟ | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| ขั้วต่อเครื่องขยายสัญญาณไฟเบอร์ 1 | AND/OR output |
| แหล่งกำเนิดแสง (ความยาวคลื่น) | Red LED (650 nm) |
| สายเคเบิล PVC ยาว 30 ซม. พร้อมหัวต่อแบบ M8 (4 ขา) | E3X-CN21-M3J-2 0.3M |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน