| พารามิเตอร์ | ค่า |
|---|---|
| เอ็นพีเอ็น | - |
| คอม3 | E3S-DCP21-IL3 |
| รายการ | Sensing method |
| เลนส์ | Methacrylic resin (PMMA) |
| แบบอย่าง | E3S-DCP21-IL2 |
| เอาต์พุต | Push-pull |
| ปุ่มต่างๆ | Elastomers |
| อัตรา Baud | E3S-DCP21-IL3: COM3 (230.4 kbps), E3S-DCP21-IL2: COM2 (38.4 kbps) |
| ตัวเชื่อมต่อ | Diecast zinc (nickel-plated brass) |
| วัสดุ | Case |
| ตัวชี้วัด | ABS |
| ความยาวของข้อมูล | PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) |
| เวลาตอบสนอง | Operate or reset: 50 µs max. for each (2-point teaching mode)Operate or reset: 150 µs max. for each (1-point teaching mode) |
| วิธีการตรวจวัด | Appearance |
| ระยะการตรวจจับ | 10±3 mm (White paper 10 ×10 mm) |
| เวลาวงจรขั้นต่ำ | E3S-DCP21-IL3 (COM3): 1.5 ms, E3S-DCP21-IL2 (COM2): 4.8 ms |
| วงจรป้องกัน | Power supply reverse polarity protection, output short-circuit protection and output incorrect connection protection |
| ระดับการป้องกัน | IEC 60529 IP67 |
| แรงดันไฟฟ้าของแหล่งจ่ายไฟ | 10 to 30 VDC±10% (Ripple (p-p) 10% max.) |
| ฟังก์ชันหลักของ IO-Link | Operation mode switching between NO and NCTimer function of the control output and timer time selecting function (Select a function from disabled, ON delay, OFF delay, one-shot or ON/OFF delay.) (Select a timer time of 1-5000 ms.)Selecting function of ON delay timer time for instability (0 (disabled)-1000 ms)Monitor output function (PD output indicating a relative detection quantity)Energizing time read-out function (unit: h)Initialize the settings function “Restore the factory settings” |
| ช่วงอุณหภูมิแวดล้อม | Operating: −10 to 55°C; Storage: −25 to 70°C (with no icing or condensation) |
| แหล่งกำเนิดแสง (ความยาวคลื่น) | Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm) |
| ขนาดจุด (ค่าอ้างอิง) | 1 × 4 mm |
| ข้อกำหนดการสื่อสาร | IO-Link specification |
| การสะท้อนแบบกระจาย (การตรวจจับเครื่องหมาย) |
ข้อมูลจำเพาะทางเทคนิคและข้อมูลประสิทธิภาพ
คู่มือการติดตั้งและการใช้งาน